Design due mid 2022.

Knock down section ash staff, Stepped down from 1-1/4" to 1"

This oval 1 x 1-1/2" staff is about the same weight as the 1.25" round. Heavier than the more popular 1-1/8" quarterstaff. So pick according to your strength.

(2)

The 1-1/4" quarter staff is heavier than the 1-1/8" quarterstaff. So pick according to your strength.

(7)

Replacement rectangular shaft.

(1)

The 1-1/4" quarter staff is heavier than the 1-1/8" quarterstaff. So pick according to your strength.

(6)

Replacement rectangular shaft.

(11)

Setup appears for Oversize Shipping charge.

(3)

This oval 1 x 1-1/2" staff is about the same weight as the 1.25" round. Heavier than the more popular 1-1/8" quarterstaff. So pick according to your strength.

Much lighter in weight than the hickory and more flexible. But it can really take a beating.

With skin is better for impact, but may be rough or splintery.
Without skin is smother, so better for thrusting/sliding spear work. But may get damaged when hit.

(9)

Much lighter in weight than the hickory, the skinless rattan is fairly smooth so you can slide you hands along the shaft for staff and spear work.

Without skin is smother, so better for thrusting/sliding spear work. But may get damaged when hit.
With skin is better for impact, but may be rough or splintery.

(6)

This series of staves are made with 2 layers of impact grade hickory laminated together to 1-1/8" (28.5mm) diameter.

.

(1)

This series of staves are made with 2 layers of impact grade hickory laminated together to 1" (25mm) diameter.

.

(3)

Custom engrave your staff with text.

Special graphics may cost more.

Include your requested engraving information in the notes section during checkout. Mention what font you want.

(31)

A single 1-1/4" black rubber blunt.

This blunt is made for 1-1/4" staves.
Also will work on the rectangle shaft.

(31)

A single 1-1/8" black rubber blunt.

This blunt is made for 1-1/8" staves.

(9)