Navigate to the undefined homepage

Paratschwert Feder, Regenyei Armory Custom Build
Paratschwert Feder, Regenyei Armory Custom Build - Image 1 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 2 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 3 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 1 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 2 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 3 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 4 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 1 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 2 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 3 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 4 of 0
Paratschwert Feder, Regenyei Armory Custom Build - Image 5 of 0

Paratschwert Feder, Regenyei Armory, Custom Build

0 Reviews
$0.00
Will ship in 4-6 Months
Product Code: RA.LS.Paratschwert.C
Choose your options:
Grip Cover
This will be a custom build for grip type and Medium blade strength, please allow 3-4 months to make.

Paratschwert or the Museal (Alternate RA Name) This piece is a replica of an original – 16th century – “paratschwert” which can be found at Schweizerische Landesmuseum, Zürich. Measurements of the finding was taken by Daniel Jaquet. It has a medium flexible blade. With this flexibility the feder is suitable for medium flex fencing. We made small changes on the blade, on the original schilt there is a gap, we made it totally flat. We copied the crossguard and pommel, these have exactly the same dimensions as the original one. The PoB is also exactly the same and the weight too.

6 Month Warranty.

See Sizing tab for more information.


Warranty: 6 Months – More about warranty: HERE >>

  • Weight: ~1400 g
  • Full length: 130,5 cm
  • Tip: rounded
  • Blade length: 95,5 cm – from crossguard to tip
  • Blade strength:light7-9,5 kg
  • Scale Flex Test: ????lbs (kg)
    SCA Hang Test: xxxx". Pass Cut & Thrust, Fail Rapier Test.Blade base thickness:
    5 mm
  • Blade base thickness: 5 mm
  • Blade & crossguard: 51CrV4 spring steel
  • Blade & crossguard: 49-51 HRC
  • Crossguard: custom – 27,5 cm
  • Grip length: 33,5 cm – including pommel
  • Grip type: oval – variable cover
  • Pommel: custom – polished
  • Point of balance: 4,5 cm – from crossguard
  • Width of the blade after the schilt: 17 mm
  • Width of the blade at the tip: 25 mm





Production time: 3-5 Months

Reviews

Average Rating:
( 0 )